Use the nameplate to establish the switch’s identity
Photograph or transcribe existing, safely accessible nameplate information, including manufacturer, catalog or type designation, serial number, and stated voltage and current ratings. Treat each field separately: 34.5 kV describes a voltage class, not an ampere rating. A label, drawing, or project title that says “34.5-kV disconnect” is a useful lead, but it does not by itself verify every equipment rating or configuration.
If the plate is obscured, missing, or difficult to read, say so rather than filling gaps from memory. Existing equipment schedules, one-lines, purchase records, or maintenance documents may help clarify identification. Do not open an enclosure or approach equipment to obtain details. A hypothetical example: a schedule might identify a 34.5-kV class switch while a separate nameplate field records its continuous-current rating; preserve both as distinct facts.
Describe poles, blades, and operating hardware precisely
A disconnect assembly may be single-pole or arranged as a three-pole set, with construction and linkage varying by design. Report what can be established from records or safe exterior views: number of poles, visible blade arrangement, mounting style, and whether the units appear to be a coordinated set. If it is unclear whether components belong together, identify them as a group of uncertain completeness instead of assuming they are interchangeable.
Operating hardware is part of the identification, not an incidental accessory. Note whether documentation or visible features indicate manual or motor operation, gang operation, an operator mechanism, interphase linkage, support structures, or associated insulators. Describe missing, detached, or separately stored parts. A hypothetical lot could include three switch poles and a detached operating handle; listing those separately helps a buyer review completeness without implying that the assembly has been inspected or tested.
Explain condition without testing or approaching apparatus
Share condition observations only from existing paperwork or safely accessible exterior information. For example, records may mention corrosion, damaged insulators, a bent linkage, missing hardware, or a prior maintenance concern. Distinguish documented history from a visual impression, and identify unknowns plainly. No seller testing is required for an initial discussion, and there is no need to operate the switch, touch conductors, measure anything, or open equipment to prepare an inquiry.
A disconnect’s apparent condition does not establish its electrical status or fitness for service. Do not infer that it is isolated, de-energized, or ready for removal from a project description or an old record. Qualified site personnel determine electrical isolation and safe work conditions; qualified professionals perform electrical work as appropriate. The buyer’s review can consider the information supplied, but any specific offer and its details remain subject to review.
Confirm ownership and identify the project boundary
Before discussing a sale, establish who owns the switch and who has authority to release it. A decommissioned substation may involve an owner, plant operator, contractor, lender, or other party with an interest in the equipment. Existing asset records, sale approvals, and project documents can help resolve that chain. If the disconnect is part of a larger lot, describe which poles, mechanisms, and related components are included and which are excluded.
Give a concise account of the equipment’s history where known: whether it came from a shut-down power plant, a decommissioned data center, or another site; whether it was removed previously; and whether components are stored separately. These details help distinguish a complete assembly from a partial or mixed lot. Avoid presenting assumptions as proof of title or condition. An Illinois buyer of used, surplus, and decommissioned electrical equipment reviews the specific equipment and circumstances rather than promising to accept every item.
Coordinate a review around site access and qualified removal
For an initial inquiry, provide the site location, general access constraints, approximate quantity, available records, and a contact who can explain project coordination. Mention practical conditions such as restricted entry, limited truck access, overhead obstructions, or a planned site closure if known. Do not dismantle, rig, disconnect, load, or move the switch for the buyer. Qualified crews determine isolation and removal; the buyer handles crane, rigging, disconnects, loading, freight, and hauling as appropriate.
The communication process can begin with the information and safe exterior photographs already available, followed by questions about identification, ownership, configuration, and pickup conditions. If the equipment merits a purchase discussion, the buyer can review the particulars and make a cash offer. Payment is upfront, not after pickup, and all freight is covered. The seller is not required to test the switch; the intended arrangement is that the seller does nothing but get paid, subject to the specific transaction being reviewed and agreed.
Common questions
Does a 34.5-kV description tell me the disconnect’s ampere rating?
No. Voltage and current ratings are separate nameplate fields. Share the plate or existing records where available; do not infer amperage from a project title, voltage class, or switch size.
Should I operate the blades or open the mechanism to show its condition?
No. Use existing documentation or safely accessible exterior information only. Do not open equipment, operate it, touch conductors, test, measure, or approach energized apparatus; qualified personnel handle electrical work.
Who disconnects and removes a substation switch after a sale?
Qualified crews determine isolation and removal. The buyer handles disconnects, crane and rigging, loading, freight, and hauling as appropriate; the seller does not need to dismantle or move the equipment.
