SERVING ILLINOIS STATEWIDE
ILLINOIS ELECTRICAL EQUIPMENT BUYERS

Sell Used Allen-Bradley CENTERLINE 2100 MCCs in Illinois

An Allen-Bradley CENTERLINE 2100 motor control center is easier to describe accurately when the inventory follows its physical layout. A useful record connects each section to its starter buckets, notes visible handle condition without operating anything, and…

BUYING THROUGHOUT ILLINOIS
Used electrical switchgear and equipment
ILLINOIS / STATEWIDEYOUR SURPLUS.
OUR BUSINESS.
01 /Payments Upfront
02 /No Testing
03 /We Cover All Freight
04 /All Voltage Classes Bought
Home / Selling used Allen-Bradley CENTERLINE 2100 MCCs to an electrical equipment buyer in Illinois
ABOUT THIS EQUIPMENT

Know what
you have.

Practical information for selling electrical equipment in Illinois.

Get your offer

An Allen-Bradley CENTERLINE 2100 motor control center is easier to describe accurately when the inventory follows its physical layout. A useful record connects each section to its starter buckets, notes visible handle condition without operating anything, and identifies wiring schedules that are actually available. For Illinois sellers planning a facility shutdown or equipment disposition, this guide explains how to assemble that information for a buyer’s review.

Start with a section-by-section map, not a single MCC label

Treat each vertical section as a separate inventory unit, then show how the sections fit together in the lineup. Record the section count and any legible identification information from safely accessible exterior labels or existing records. A CENTERLINE 2100 designation helps identify the product family; it does not, by itself, establish the voltage, ampere rating, or exact contents of a particular lineup.

A simple numbered sketch can connect photographs and records: Section 1, Section 2, and so on, viewed consistently from the front. Note which sections appear to contain starters, feeders, spaces, or other equipment only when that description is supported by records or visible information. For example, a hypothetical six-section lineup might have starter buckets in Sections 1 through 4 and documented spare spaces in Sections 5 and 6; mark uncertainty rather than guessing.

Build a bucket inventory that distinguishes what is known from what is inferred

Within each section, list starter buckets by their visible position, such as top, middle, or bottom, and preserve any legible bucket or device identifiers. If available, include the motor or load designation shown in an existing schedule. A description like “three starter buckets, identifiers readable on two” is more useful than assigning ratings or functions from appearance alone.

Keep electrical characteristics tied to their documentation. Voltage and ampere ratings are different specifications, and neither should be derived from the other or assumed from a CENTERLINE 2100 nameplate, a breaker handle, or a page title. If records list ratings, identify the document and the equipment it applies to; if the association is unclear, say so. The buyer can review the inventory and ask follow-up questions before discussing a specific offer.

Describe handle condition through safe, exterior observation

Record what can be seen without operating a handle or touching equipment: for example, a handle appears present, appears damaged, is obscured, or cannot be assessed from the available view. Note which section and bucket the observation concerns. Do not move a handle to determine whether it works, and do not open an enclosure, approach energized apparatus, or touch conductors to improve the description.

Separate visual condition from operating condition. A handle that appears intact does not prove that a starter is functional, and a missing or damaged handle does not establish the condition of internal components. If a qualified professional has already produced relevant documentation, identify it as a record for review. No seller testing is required for a buyer discussion; the seller need not test, dismantle, rig, or move the MCC.

Make wiring schedules useful by stating their scope and status

List wiring schedules, elementary diagrams, bucket schedules, or other available records by document name, revision or date if shown, and the sections they appear to cover. Indicate whether a document is current, historical, incomplete, or of uncertain applicability only when that status is known. A schedule for part of a lineup should not be presented as covering every section or bucket.

A hypothetical example might read: “Starter schedule dated 2018, Sections 1–3; no schedule located for Sections 4–5.” That concise qualification gives a reviewer a realistic picture without implying missing information does not matter. Existing paperwork and safely accessible exterior information are appropriate sources. Do not create a new electrical test record or open equipment to verify a schedule; flag discrepancies for discussion instead.

Coordinate review and site logistics before the lineup is removed

Send the section map, bucket list, handle observations, available schedules, and clear exterior photographs together, with captions that match the section numbering. Also explain whether the lineup is installed, stored, or part of a planned decommissioning, and identify known access constraints such as restricted receiving hours or limited loading access. These details help the buyer assess the configuration and coordinate a possible removal plan.

The Illinois buyer purchases used, surplus, and decommissioned electrical equipment, including MCCs and equipment across voltage classes. It reviews the information before making a specific offer; not every item is necessarily suitable for purchase. For a transaction that proceeds, payment is upfront, no seller testing is required, and freight is covered. The buyer handles crane work, rigging, disconnects, loading, freight, and hauling, with qualified professionals performing electrical work as appropriate. The seller should not dismantle or move the equipment.

Common questions

Should I list CENTERLINE 2100 starter-bucket ratings from the bucket appearance?

No. Record legible identifiers and refer to existing schedules or documentation for ratings. Keep voltage and ampere information distinct, and mark any unverified association as unknown rather than inferring specifications from appearance.

How should I report a handle that looks damaged or is hard to see?

Identify its section and bucket, then describe only the visible condition, such as damaged, obscured, or not assessable. Do not operate it, open the enclosure, or test the equipment.

Do wiring schedules need to cover every section for the buyer to review the MCC?

No. State which sections each available schedule appears to cover and note known gaps or uncertain applicability. The buyer can review the partial documentation alongside the inventory and discuss remaining questions.

STRAIGHTFORWARD FROM THE START

Sell it in three steps.

No complicated process. Just a direct conversation about your equipment and a clear way forward.

01

Show us what you have.

Send photos of the nameplate and equipment, along with your location and any available specifications.

02

Get a cash offer.

We review the details and discuss an offer. You don’t need to test the equipment for us.

03

Get paid upfront.

We handle crane, rigging, disconnects, loading, freight and hauling. You get paid upfront and we handle the heavy lifting.

LET’S TALK EQUIPMENT

Let’s make a deal.

We buy switchgear out of decommissioned data centers and shut-down power plants, and used and surplus electrical equipment throughout Illinois.

We handle all rigging and logistics: crane, rigging, disconnects, loading, freight and hauling are on us. The seller does nothing but get paid.

HAVE PHOTOS READY?Text Nameplate Photos
OR CALL US DIRECTLY(614) 715-3047

saleselectricalbuyers@gmail.com

START HERE

Request a Quote

Share what you know. If you don’t have every detail, that’s okay.

JPEG or PNG photos, up to 10 MB combined. Forms are processed by FormSubmit. For larger files, email or text us directly. Please do not send sensitive documents.

Request a Quote